|
At a bit of a loose end over the weekend, so dusted off mine. Hot end is a bit borked, so ordered a selection from AliExpress during whatever sale was on last weekend. Trying to work out how best connect the heaty-uppy bit to the ABS X-carridge - at least to the point where I can print new ones that are more suited to these particular extruders. Either that or I upgrade the X-Axis to use metal bits on a 20x20 bar (seems to be the preferred way these days over slip bearings on rods).
Nice to see that the heaters come with silicon bras now - and media feeders seem to be an art for in themselves with some going for $80+ each (vs a $5 aluminium construct with a pinion gear and roller).
|